You can reach us:
So Sondermaschinen Vertriebs GmbH
Schaffhauser Strasse 22
79713 Bad Säckingen
Germany
T: +49 7761 933 069
F: +49 7761 933 067
info@so-gmbh.de
Thank you for your visit!
WUKO MASTER 0420 / 0420S
Model 0420 and model 0420S (with longitudinal cutting facility) available
- Machine frame made of modular aluminium profile system
- Upper machine cover:
Swing doors, easy to open, with safety switch, frame elements made of transparent, impact‐resistant polycarbonate
⇒ clear view during profiling process
⇒ easy access for adjustment and service - Mobile, two fixed and two swivel castors with brakes
- 230 V motor with frequency converter for continuously variable working speed:
0–12 m/min (0–40 ft/min) - Forward and backward run
Profiling
- Fabrication of the profile for the single or double-lock standing seam
seam height 25 mm/1″ - Working width between 290 and 810 mm/11.5″ and 32″ continuously adjustable by hand wheel over two spindles
⇒ panel width about 210–730 mm/8.3–28.7″ - Inlet guides easily and precisely adjustable (measure correction on the profile)
- Clean profile, poor in tension, made by eight hardened roll forming stations
- 8th forming station for aligning the panels and for curving the panels – convex or concave – smallest radius about 6 m/20′
- Cut‐proof, extremely resilient polyurethane coated drive rollers
- Electromechanic preset counter – safely placed within the frame
- Also for profiling short (min. length about 500 mm/20″) or tapered panels